Johnson & Starley Ltd. Heat Bank Thermal Store Units Installation, Commissioning, Servicing, & Users Instructions
Heat Bank Thermal Store System A - Electric
Publication ZZ 13/10/00 Copyright DPS 1788-1
Heat Bank Thermal Store System HBPP System A Everest combination unit Single Heat Exchanger (30 ltr/min) Immersion Heater Controller Electrically heated 50mm Foam Insulation All fitted controls are wired Thermostatic Blending Valve 22mm
1 Integral Feed & Expansion Tank 2 Plate Heat Exchanger 3 Heat Exchanger Pump 4 Flow Switch 5 Thermostatic Blending Valve, Mixcall III 6 Manual Air Vent 8 Filling Vent 9 Feed to Ball Valve 10 Isolating Valve 11 Y-Pattern Strainer (supplied loose) 12 Overflow (supplied loose) 13 Cold Feed / Expansion 14 Boost Immersion Heater 3kW Incaloy with Stat 15 Economy Immersion Heater 3kW Low Noise with Stat 16 Cold Mains In, 22mm 17 Hot Mains Out, 22mm 18 Drain Cock 40 Tight Fitting Lid 42 Wiring Centre 43 Horstmann Electronic 7 Immersion Heater Controller
Heat Bank Thermal Store System 